FAQ
Important Note: This document is used for both CAPPSNC and CAPPS DMIS software as they use the same internal architecture. For ease the generic name CAPPS...
Thu, 13 Dec, 2018 at 10:10 AM
If you are getting a reminder message, "Software is more than one year old" at start up, please follow the steps below to disable it: Make ...
Mon, 5 Mar, 2018 at 11:52 AM
You can section curves and grid patterns on a CAD surfaces using the Surfaces option under Measure Toolbar as shown below: In order to create such pat...
Tue, 6 Mar, 2018 at 4:40 PM
Like many software offerings, CAPPS-NC and CAPPS-DMIS make use of InstallShield® as the installation tool. With InstallShield®, installing CAPPS-NC or CAPPS...
Wed, 28 Aug, 2024 at 5:29 PM